








After years of exposure to rain, dirt, and outdoor furniture, concrete patios often develop cracks, stains, and worn patches. While installing new tiles is one way to cover the surface, painting offers an alternative method to achieve a tiled appearance without the need for additional flooring.
The homeowner behind the blog Keep Calm and Decorate applied this technique to a large backyard patio. Following a thorough cleaning and filling of the cracks, she used painter’s tape to create a grid of 16-inch squares and then applied two contrasting paint colors to the surface.
The final result mimics reddish terracotta tiles with pale grout lines. No actual tiles were installed, and the original concrete slab remained intact beneath the painted design.
The Original Patio Was Plain Concrete
The backyard featured a large rectangular concrete slab extending from the house toward the lawn. The surface displayed discoloration and signs of wear, with a small wooden staircase leading to the back door.
Prior to painting, the patio was pressure-washed to eliminate dirt and mold. Cracks were filled with concrete repair material and allowed to dry, after which the surface was coated with a mold-resistant primer.
White Paint Created the Base for the Tile Pattern
The primed patio was coated with Valspar Porch and Floor Oil Paint in the color Chowder. This pale shade was intended to serve as the visible lines between the painted tiles.
The entire slab received this base color, including the area designated for the grid. The homeowner used a roller specifically designed for concrete surfaces to apply the paint.
Painter’s Tape Marked 16-Inch Squares
Once the base coat had dried, strips of 1-inch FrogTape were arranged across the patio to form a grid of 16-by-16-inch squares.
The tape was applied along straight horizontal and vertical lines, creating equal-sized sections across the concrete. An 8-inch border was maintained around the outer edges to separate the pattern from the surrounding grass and house.
Rusted Earth Paint Covered the Grid
The second color used was Valspar Porch and Floor Oil Paint in Rusted Earth, a reddish-brown shade.
Paint was rolled over the taped surface, covering the squares while the tape strips protected the lighter base coat underneath.
After 24 hours of drying time, the tape was removed to reveal the Chowder-colored lines.
The Finished Patio Resembled Terracotta Tiles
Removing the tape exposed a grid of reddish squares separated by pale lines. The design resembles large outdoor tiles, although the surface is still painted concrete.
A white border frames the edges of the grid, while the straight lines provide a defined pattern for the rectangular slab without requiring any cutting into the concrete.
The Painted Surface Became an Outdoor Seating Area
The completed patio was furnished with a wicker chair, a matching footstool, and a small white side table. The painted squares remain visible beneath the furniture.
The original concrete steps were also painted white to match the border around the patio.
Close-up views highlight the contrast between the white steps and the reddish floor. The painted pattern extends toward the entrance, with the square outlines clearly visible across the slab.
This project altered the patio's appearance without covering it with pavers or adding a new layer of flooring. Outdoor paint requires a suitable concrete surface, and future maintenance depends on weather exposure, preparation quality, and foot traffic.
Another homeowner adopted a similar budget-friendly outdoor approach by removing old gray porch carpet and spending 16 hours painting the floor to resemble tile rather than installing new flooring.
Would you use painter’s tape and concrete paint to create a tile pattern, or install outdoor tiles instead?
Image credits go to Keep Calm and Decorate.
The post Instead of Laying Patio Tiles, She Used Painter’s Tape and Two Paint Colors on Her Concrete Patio appeared first on Homedit.

I love this creative solution! The terracotta look is stunning and saves so much hassle compared to real tiling. Great job transforming that worn concrete into a beautiful, inviting space.
Thank you! I’m thrilled you love the terracotta look. It really is a game-changer for updating worn concrete without the heavy lifting of real tile. Enjoy your beautiful new patio!