IKEA KALLAX Units Create Bed Base and Hidden Storage

they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress a17c1be
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 62e982e
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 6e1cdb1
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 8d72d8e
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 080c699
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 60236b3
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 65a8a93
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress 7ad2517
they used 3 ikea kallax bookcases instead of a bed frame to create storage beneath their mattress cc7b29b

The bedroom was small but had enough floor space for a full-size mattress. A standard bed frame would have left minimal room for storage. The homeowners avoided buying a storage bed or adding a dresser. Instead, they designed a solution to utilize the space under the mattress without increasing the room's footprint.

Ilya and Sarah shared their DIY project on IKEA Hackers. They built a raised bed base using three IKEA KALLAX bookcases. The units were arranged in a U-shape. Plywood panels covered the center, and the mattress rested on top. This setup allowed access to storage compartments on three sides. The total cost for materials was about $200.

Three IKEA KALLAX Bookcases Formed the Bed Base

Two wood-effect KALLAX units were placed along opposite sides of the bed. A white unit connected them at the foot. Each bookcase was turned on its side. The compartments faced outward to maximize storage access.

This layout left an open space in the center of the structure. The bed was positioned against the bedroom wall. The shelving units acted as the perimeter, eliminating the need for a traditional frame.

Non-Slip Rug Pads Went Between the Bookcases and Plywood

The builders cut non-slip rug pads into strips. These strips were laid across the upper surfaces of the KALLAX units.

The textured pads provided necessary grip for the plywood panels. A rug placed beneath the bookcases helped reduce movement against the wood floor.

Three Plywood Panels Covered the Open Center

Ilya and Sarah chose three plywood sheets instead of one large panel. This decision was made because the smaller pieces could fit inside their car.

They started by placing panels across the opposing bookcases. This spanned the empty center of the U-shape. A storage bin was positioned beneath the platform before the opening was fully covered.

The First Two Panels Formed the Rear Platform

Two plywood sheets covered the section closest to the wall. Their edges met in the middle.

The panels rested directly on the shelving units. No visible screws or brackets were used. This left the front portion open for the final sheet.

The Third Plywood Sheet Completed the Bed Base

The final sheet extended across the white KALLAX unit at the foot of the bed. It joined the other two panels to create a continuous surface for the mattress.

The plywood sections could be lifted to access the large central space. The builders recommended storing seasonal items there. Accessing these items requires removing the mattress and lifting the panels.

A Full-Size Mattress Covered the Plywood Platform

Once the panels were securely in place, the builders added the mattress. They also fitted the sheet.

The mattress covered the supporting plywood structure. The shelving remained visible around the lower edges. The height of the bookcases raised the sleeping surface above the floor level.

Bedding Concealed the Bookcases Beneath the Mattress

A gray bedcover hung over the sides of the structure. A striped blanket was spread across the top. Small bedside tables sat on either side. A stuffed husky rested against the wall.

Once the bedding was in place, the bed resembled a conventional platform design.

The Finished Bed Has Storage Along Three Sides

A later photograph revealed the open KALLAX compartments beneath the mattress edge. The cubes offered room for storage boxes and bedroom belongings. This design avoided occupying additional floor space.

The builders suggested using IKEA DRÖNA boxes for the openings. The center area could accommodate larger items kept out of sight.

KALLAX bookcases are designed for shelving, not as load-rated bed supports. The project documents the builders’ approach. It does not establish that the configuration meets bed-frame safety requirements.

Another homeowner repurposed IKEA storage furniture on a larger scale. They used six BILLY bookcases instead of building walls. This created a bedroom inside a studio apartment.

Would you use IKEA KALLAX bookcases beneath a mattress or choose a conventional storage bed?

Images and project details courtesy of Ilya and Sarah, via IKEA Hackers.

The post They Used 3 IKEA KALLAX Bookcases Instead of a Bed Frame to Create Storage Beneath Their Mattress appeared first on Homedit.

Related Posts

2 thoughts on “IKEA KALLAX Units Create Bed Base and Hidden Storage”

  1. Benjamin Harris says:

    So we paid $200 to sleep on bookshelves. Because nothing says “cozy retreat” like your pillow resting precariously over a stack of potential falling hazards. Truly, the pinnacle of modern interior design.

    • Darcie George says:

      Haha, fair point! While the aesthetic is undeniably cool, I completely agree that comfort and stability are key. If you’re considering this DIY, adding a sturdy mattress base or plywood layer helps secure those boxes and keeps things cozy. Thanks for the fun take on it!

Leave a Reply

Your email address will not be published. Required fields are marked *