









Plastic soap dispensers often remain by the sink until empty, only to be swapped for a new bottle. An old Mason jar provides an alternative. By applying white spray paint and attaching a pump from a used dispenser, the glass vessel transforms into a refillable soap bottle that evokes the look of vintage milk glass.
The white coating obscures the clear glass but allows the raised lettering to show through. A silver metal pump provides a contrasting accent, and the jar’s screw-top lid secures the assembly.
Homedit contributor Erin Francois executed this project using a pint-sized Mason jar, white lacquer spray paint, a soap pump, glue, and fine-grit sandpaper. The design draws inspiration from milk-glass containers that were popular in the early 20th century.
A Mason Jar Gets a Coat of White Paint
The transformation starts with a clean Mason jar and white lacquer spray paint. Erin painted the exterior of the glass while leaving the interior unpainted to hold the liquid soap.
The painted jar was allowed to dry for approximately 20 minutes before the next steps began.
The Metal Lid Needs an Opening for the Pump
A hole in the center of the metal lid accommodates the dispenser mechanism. This opening must be sized to fit the pump stem snugly, avoiding large gaps.
Erin used a paring knife in the original project, though a dedicated metal-cutting tool is a safer option for cutting the lid. Cutting metal can produce sharp edges that require smoothing before handling.
A Soap Pump Fits Through the Lid
The pump is inserted through the opening, with its dispensing spout positioned above the lid and the intake tube extending below it.
A pump salvaged from a different soap bottle can be used, provided its tube is long enough to reach into the jar and its mounting section fits the lid.
Glue Secures the Pump Beneath the Lid
Erin applied all-purpose glue around the underside of the pump fitting to attach it to the metal lid. She allowed about 30 minutes for the glue to dry in the original tutorial.
The adhesive should be compatible with the materials used and kept away from surfaces that will come into contact with the soap.
The Painted Jar Becomes a Soap Dispenser
Once the pump is attached, the lid is placed on the jar opening, and the threaded metal band holds the components together. The final assembly maintains the shape of a traditional Mason jar, complete with its embossed lettering and rounded shoulder.
Sandpaper Reveals the Raised Lettering
Fine-grit sandpaper is used to remove small amounts of white paint from the raised lettering. This process highlights the embossed details without removing the finish from the rest of the glass.
The Finished Jar Resembles Vintage Milk Glass
The completed dispenser features an opaque white glass body paired with a silver metal pump. The original Mason jar lettering remains visible on the front.
This refillable soap container now replaces the original plastic bottle. The painted finish may require protection from frequent splashes and handling, especially near a kitchen or bathroom sink.
Would you turn an old Mason jar into a soap dispenser or keep a standard refillable bottle?
Original project and photographs by Erin Francois for Homedit.
The post Toss Your Plastic Soap Dispenser: An Old Mason Jar and a Coat of White Paint Make a Vintage Replacement appeared first on Homedit.

Love this vintage twist! The white spray paint perfectly mimics milk glass, and the silver pump adds such a chic contrast. Simple, stylish, and a great way to reuse jars.
Thank you so much! I’m thrilled you love the milk glass effect. It really does transform a simple jar into something elegant. Repurposing those jars is such a satisfying part of the process. Enjoy your new dispenser!