DIY Christmas Trees Made from Tomato Cages and Garland

tomato cages wrapped in green garland become christmas trees for the front porch 425b3d9
tomato cages wrapped in green garland become christmas trees for the front porch 6a42091
tomato cages wrapped in green garland become christmas trees for the front porch b9e3db4
tomato cages wrapped in green garland become christmas trees for the front porch a19e3b9
tomato cages wrapped in green garland become christmas trees for the front porch 04a550a
tomato cages wrapped in green garland become christmas trees for the front porch 6211473
tomato cages wrapped in green garland become christmas trees for the front porch bc071e3
tomato cages wrapped in green garland become christmas trees for the front porch 6b9288e
tomato cages wrapped in green garland become christmas trees for the front porch f9124fc
tomato cages wrapped in green garland become christmas trees for the front porch de4bb44

Gardeners typically use tomato cages to support climbing plants, yet their conical metal structures offer an alternative purpose during the holidays. By encircling the wire supports with green garland, these open frames transform into miniature evergreen trees.

Homedit contributor Emily Burmeister crafted a pair of matching Christmas topiaries for her front porch. She utilized two 3-foot tomato cages, artificial garland, pinecones, and galvanized metal buckets. Each tree required two 9-foot lengths of garland, with the metal frame serving as the underlying structure for the foliage.

These finished trees flank the entrance to the porch, with silver-painted pinecones tucked among the branches. Instead of purchasing ready-made artificial topiaries, the project relies on garden supplies.

Tomato Cages, Garland, and Metal Buckets Form the Base

Construction begins with a 3-foot wire tomato cage, two 9-foot sections of artificial evergreen garland, a galvanized bucket, and pinecones for decoration.

The cage design includes a wide circular base, smaller rings above it, and metal supports that taper toward the apex. This open frame provides natural attachment points for the garland, removing the need for a wooden core.

Green Garland Wraps Around the Tomato Cage

Emily positioned the cage with its widest ring resting on the floor. She began winding the garland around the lower section, looping the greenery through the metal supports to secure it against the frame. Her work progressed from the bottom toward the narrower top.

Pressing the garland close to the wire minimizes gaps between the branches, effectively concealing the metal rings.

The Garland Builds Up From the Base to the Tip

The initial 9-foot garland covered nearly half of the cage structure. Emily then applied the second length, pushing the greenery toward the previously laid rows to ensure full coverage of the frame.

As the wire cage narrowed toward the top, each subsequent turn required less garland. The branches were gathered around the upper supports to finalize the pointed shape.

Silver Pinecones Add the Christmas Decoration

Once the cage was fully covered, the greenery formed a small artificial Christmas tree characterized by a broad base and an uneven, pointed top.

Emily interspersed pinecones with a silver glitter finish among the branches. This placement breaks up the solid green surface without obscuring the tree's overall shape.

The two finished topiaries share a similar form, though the garland branches extend in different directions. Several pinecones are positioned near the upper sections, while more are placed toward the base.

Decorations are limited to the pinecones, leaving the majority of the artificial greenery exposed.

Galvanized Buckets Hold the Trees Upright

Emily placed the finished wire frames into galvanized metal buckets to create a stable base. Concerned that the lightweight tomato cages might topple outdoors, she used the buckets for support.

Even with buckets, the containers and frames require securing against wind for outdoor use. A metal bucket alone does not guarantee that a lightweight tree will remain upright in strong weather.

The Finished Trees Stand Beside the Front Door

The matching trees stand beside the white porch columns, framing the walkway toward the dark green front door. Their galvanized containers rest on the concrete floor, with the greenery extending above the surrounding porch furniture.

A wire reindeer, holiday doormat, and small wreath complete the entrance decorations.

One of the trees stands near a white column and evergreen wreath. The silver pinecones remain visible against the greenery, while the bucket keeps the base contained within a small section of the porch.

From Garden Supplies to Christmas Porch Decorations

A before-and-after comparison displays the wire tomato cage, loose garland, and galvanized bucket alongside the finished Christmas topiary. Two lengths of garland cover the metal frame, while silver pinecones and the bucket complete the decoration.

Would you turn tomato cages into Christmas trees for your front porch or use traditional artificial topiaries?

Image credits by Homedit.com

The post Tomato Cages Wrapped in Green Garland Become Christmas Trees for the Front Porch appeared first on Homedit.

Related Posts

2 thoughts on “DIY Christmas Trees Made from Tomato Cages and Garland”

  1. Daniel Kim says:

    Ah, yes. Because nothing says “festive holiday spirit” quite like repurposing garden stakes meant for tomatoes. I’m sure Santa will be deeply impressed by my culinary-grade evergreens this year.

    • Darcie George says:

      Haha, exactly! It’s all about that rustic, homemade charm. Santa might prefer the fancy stuff, but these tomato cage trees bring a unique, cozy vibe that’s hard to beat. Plus, they’re super easy to store!

Leave a Reply

Your email address will not be published. Required fields are marked *