DIY Brass Toilet Paper Holder Made From Lamp Parts

Most people shopping for a toilet paper holder look in the bathroom hardware aisle. Few would think to check a store selling lamp components, but that’s where the materials for this brass fixture came from. Two hollow pipes, a threaded connector, and a few small fittings were enough to create a wall-mounted holder that looks like a finished bathroom accessory.

instead of buying a toilet paper holder she made one from brass lamp parts 49ccb05

In a project shared on Homedit, Brittney Smart assembled the unfinished brass pieces without cutting, soldering, or modifying the metal. The result was mounted against a black bathroom wall, where the gold-toned stands out beside the white toilet.

The Parts Were Made for Lamps, Not Bathrooms

instead of buying a toilet paper holder she made one from brass lamp parts c9d9c3d

Six brass components formed the collection: a 3-inch pipe, a 6-inch pipe, a 90-degree armback connector, two mounting flanges, and a flat circular cap. One flange was optional for the horizontal installation.

Both pipes had threaded ends, allowing them to connect to the fittings without welding or additional fabrication. The shorter pipe would support the holder from the wall, while the longer one would carry the toilet paper roll.

Two Pipes and a Connector Created the Shape

instead of buying a toilet paper holder she made one from brass lamp parts ffec11a

The shorter pipe joined a threaded wall flange to the 90-degree connector. Once the longer pipe was attached, the pieces formed an L-shaped fixture with enough clearance between the wall and the roll.

The threaded fittings were designed to connect lamp components, but their shape worked for this bathroom accessory. No cutting or drilling into the brass was required.

A Brass Cap Made the Fixture Look Finished

instead of buying a toilet paper holder she made one from brass lamp parts 45f4709

A round brass cap covered the exposed end of the longer pipe, providing a stop for the toilet paper roll. Its flat face matched the mounting hardware, while the narrow pipe kept the design compact.

The assembled fixture used the unfinished brass surfaces as its final appearance, without additional paint or decorative covering.

The Finished Holder Was Mounted Beside the Toilet

instead of buying a toilet paper holder she made one from brass lamp parts 364b890

Mounted against a black wall, the brass holder contrasts with the white toilet and paper roll. The circular wall flange secures the shorter support, while the longer arm carries the roll in a horizontal position.

instead of buying a toilet paper holder she made one from brass lamp parts bcc64b5

The open-ended design allows the paper roll to slide onto the rod without removing a spring-loaded spindle.

From Lamp Hardware to Bathroom Fixture

instead of buying a toilet paper holder she made one from brass lamp parts 8bcd655

The comparison shows the loose brass parts beside the completed holder. What began as threaded pipes and lighting fittings became a bathroom accessory with a matching metal finish.

The project took only minutes to assemble, using parts made for a different purpose. Instead of purchasing a finished toilet paper holder, the homeowner used the dimensions and connections of lamp hardware to make one.

The post Instead of Buying a Toilet Paper Holder, She Made One From Brass Lamp Parts appeared first on Homedit.

Related Posts

2 thoughts on “DIY Brass Toilet Paper Holder Made From Lamp Parts”

  1. Benjamin Harris says:

    We assume function dictates form, yet here, utility transcends origin. The lamp’s skeletal brass finds new purpose, proving that beauty often lies not in intended design, but in the quiet dignity of repurposed intention.

    • Darcie George says:

      Thank you! I love that perspective. Repurposing those lamp parts was all about finding beauty in their second life. It is wonderful to know the quiet dignity of that design resonated with you as much as it did with me during the build.

Leave a Reply

Your email address will not be published. Required fields are marked *