DIY Soap Dispenser Hack Uses Tubing to Connect to Bulk Bottle

he got tired of refilling his kitchen soap dispenser every month so he made one change f68ce40
he got tired of refilling his kitchen soap dispenser every month so he made one change 7d100fa
he got tired of refilling his kitchen soap dispenser every month so he made one change d96b378
he got tired of refilling his kitchen soap dispenser every month so he made one change 1bd6de5

While built-in dispensers help clear counter space, refilling them often proves annoying. The small reservoir tucked under the sink is frequently blocked by other cleaning items. Additionally, pouring soap into the top opening often results in spills or overfilling.

A homeowner solved these issues by linking the current pump to a bigger soap source located under the sink, rather than swapping out the unit entirely.

Using plastic tubing, u/positronus finished the upgrade in roughly 10 minutes. This adjustment eliminated the need to refill the original container on a monthly basis.

Why Connect Plastic Tubing to a Kitchen Soap Dispenser?

Clear plastic tubing takes the place of the short intake line attached to the pump. This hose extends into the lower cabinet, enabling the pump to pull soap from a different container.

This setup maintains the current countertop fixture and avoids the need for additional sink holes.

How He Extended the Soap Dispenser’s Supply Line

The user detached the metal pump head and connected the tubing to the white plastic intake assembly.

He pushed the hose through the dispenser opening and down into the cabinet below. The connection must seal tightly against the pump stem to stop air from leaking in.

A 135-Ounce Bottle Replaced the Small Reservoir

The hose leads into a 135-fluid-ounce bottle of Kirkland UltraShine dish soap, which holds 3.99 liters. This container rests on the cabinet floor next to the plumbing.

Once the bottle empties, the user can simply move the tube to a fresh bottle.

Because the supply line is longer, it took 15 pump presses for soap to reach the dispenser for the first time.

What to Know Before Trying This Soap Dispenser Trick

Many built-in dispensers allow refilling from above by removing the pump head. If you want a larger reservoir, ensure the tubing fits the pump connection and reaches the bottle's bottom. Some pumps might require a check valve to keep the line primed.

Maintaining cleanliness is also important. Research published in MicrobiologyOpen revealed bacterial contamination in 70.2% of refillable pump dispensers tested in German hotels. While the study did not focus on kitchen dish soap, it underscores the need to keep reusable pump parts clean and dry.

Would you connect your soap dispenser to a larger bottle or keep refilling it from above?

Images courtesy of u/positronus.

The post He Got Tired of Refilling His Kitchen Soap Dispenser Every Month, So He Made One Change appeared first on Homedit.

Related Posts

2 thoughts on “DIY Soap Dispenser Hack Uses Tubing to Connect to Bulk Bottle”

  1. Andrew Taylor says:

    This is clever! Does the tubing material affect the soap’s viscosity over time? Also, how do you prevent air bubbles from disrupting the pump mechanism when refilling the bulk bottle?

    • Darcie George says:

      Thanks! I used silicone tubing, which holds up well with most soaps. To avoid air bubbles, I ensure the tube stays submerged as the bottle empties, preventing suction of air during refills. It’s a simple setup that keeps the pump running smoothly.

Leave a Reply

Your email address will not be published. Required fields are marked *